Fuel tap petcock filter strainer Honda CBX1000 Rebel 125 Bros NT400 650 10.5mm For Sale

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Fuel tap petcock filter strainer Honda CBX1000 Rebel 125 Bros NT400 650 10.5mm:
$27.79

Here at MadMopeds we only supply parts that we use on our own bikes and our customers bikes in our workshop so you can be assured of them being of good quality.

These impossible to find brand new top quality fuel tap filters are for the following original 18 mm threaded Honda fuel taps.

* Honda CBX 1000 X 1979

* Honda Rebel 125 1996 onwards

* Honda MTX 125 1983 to 1995

* Honda Bros NT400 1988 to 1990

* Honda NT650 Bros and Hawk 1988 to 1991 with rear fuel outlet 18mm threaded tap (see images)

See our pictures for the type of 18mm tap it is for.

You are buying the filter only and not the fuel taps. Sorry but they belong to our customers.

It may also fit other taps too but it won't fit the CBX1000 if you have the 16mm or 20mm threaded tap. Contact us for those filters please

If you are resealing and rebuilding your original fuel tap then you should also replace these too 😊

They are the best available and fit tightly inside the casting body of the tap. 

We have done our homework on these and they will not need to be glued in. You may need to slightly reduce the outside diameter of the filter tube with sandpaper if it is too tight to push in with the end heated in hot water.

DO NOT USE A HEAT GUN ON THESE VERY FINE MESH FILTERS

These ones are a good tight fit inside the body or casting of the tap. They include the tank seal but they do not include the rubber spacer that fits on your brass tube. Sorry we don't have those in stock.

NOTE.... This filter is 10.6 cm or 106 mm long. This may be shorter than original but will work OK.

The diameter on the shoulder that sits inside the tap casting is 10.5 to 10.7mm

PLEASE DO NOT BUY THIS UNLESS YOU HAVE CHECKED YOUR TAP AND THAT YOU CAN USE THIS FILTER.

PLEASE CHECK BEFORE PURCHASE AS WE DO NOT ACCEPT RETURNS ON FUEL FILTERS SORRY 

We also stock the best quality heavy wall thickness fuel pipe and stainless steel clips to suit your OEM or our new tap. Our pipe is E5 and E10 petrol compliant so please see our other listings if you need some.

Dispatched using 2nd Class large letter postage. If you need it quickly please select the 1st class postage option for only £1 extra. It's so much faster!

MadMopeds UK

3/8" Inline Fuel Valve Fuel Shut Off Valve Motorcycle Inline Petcock 3/8" Hose

$16.00

Fuel tap petcock filters strainer filter set Yamaha Virago XV535 Tank Seal UK

$34.42

3/8" Inline Fuel Valve Fuel Shut Off Valve Motorcycle Inline Petcock 3/8" Hose

$31.99